FOR SALE 1986 K10 project in final stages of total resto

Trader history (0)


New member
Sep 17, 2023
Truck is in the final stages of a total frame off resto. New rockers, floor panels welded and cab along with all new inner and outer fenders, doors and hood have been Raptor lined and loose fitted. New Chevy 350 HO crate engine installed w/ Holley 4bbl 650 cfm carb and runs (engine has been broken in), new Monster Trans 700R4 transmission paired with a new NP203 transfer case. Frame was meticulously cleaned up, coated in POR15 and gloss black paint, all new suspension installed, all four corners converted to rear style leaf springs with shackle overs. All frame rivets replaced with grad 8 stainless bolts and hardware. Roughly 4-6inch lift with new springs, many parts are custom. Grease-able shackle bolts all around. Bilstein shocks, axles have been rebuilt, all new U joints and new front drive shaft (still have the old one as well). All four tires are brand new balanced with new stems. New seat upholstery, have many new components ready for install. New painless wiring kit is halfway in with all remaining parts on hand. Only glass left are both vent windows (along with all parts to rebuild them), and passenger side window glass, all other seals on hand and new weather stripping ready to go. Blazer single gas tank installed, all new fuel and brake lines (stainless), all brakes totally rebuilt, new lockers (warn). Heavy duty diff cover plates front and back. Many of the original parts still on hand tagged for reference / reuse, but 95% new parts are in boxes ready for final fitting. Fenders are not installed, all body parts are loose fitted with new poly body mounts and hardware. New radiator, brake booster and master cylinder. Also have military CUCV style front bumper and brush guard that was Raptor lined ready to go. No bed (was planning on drop on farm-type flat bed, but you can do as you'd like). All new interior parts are Chevy deep burgundy red. I have well over $18000 in this truck between parts and labor, it just needs to be put back together (final fitting) and fine tuned, a true one of a kind project. Clear title in hand, buyer to coordinate flat bed / trailer, you'll need something at least 7ft wide and 7 ft tall (if considering an interior trailer). Price is not negotiable, no trades, you pick it all up at my garage in Pulaski, VA. More pictures available on request, has been stored inside the entire time it's been apart.

$15,000 firm not interested in trades. Buyer picks up at location, will deliver within 50 mile radius of Pulaski, VA. I don't log on here often, please call or text (757) six 2 zero 4 four 0 four.


  • 20181208_162454440_iOS 1.jpg
    20181208_162454440_iOS 1.jpg
    1.7 MB · Views: 10
  • 20170601 (1).jpg
    20170601 (1).jpg
    2.4 MB · Views: 12
  • 20170805_172406040_iOS.jpg
    3.3 MB · Views: 10
  • 20170928_231554797_iOS 1.jpg
    20170928_231554797_iOS 1.jpg
    1.8 MB · Views: 13